AXS 3 DYNAMIC MICROPHONE
The AXS 3 is a dynamic vocal microphone designed for sound rein-
forcementand project studio recording applications.
Its smooth frequency response is tailored for vocals. The cardioid po-
lar pattern remains uniform throughout its frequency range, ensuring
high gain before feedback, maximum rejection of unwanted sound,
and minimum off-axis sound coloration. A neodymium magnet pro-
videshigh output level and high signal-to-noise ratio.
A steel mesh ball grille, die-cast handle, and proven shock mount sys-
tem ensure reliable performance, even in the roughest environments.
SPECIFICATIONS
Type:Dynamic
Polar Pattern: Cardioid (unidirectional), symmetrical about axis
(Figure 3)
Frequency Response: 80 to 15,000 Hz (Figure 3)
Output Impedance:Rated at150 W (290 W actual) for microphone
inputs rated at 75 to 300 W
Output Level (at 1 kHz): ?54.0 dBV/Pa ( 2.00 mV), open circuit
voltage*
*1 Pa = 94 dB SPL
Polarity:Positive pressure on diaphragm produces positive volt-
age on pin 2 relative to pin 3 of the microphone output connector
Operating Temperature Range: ?295 to 575 C (?205 to 1355 F), at
0 to 95% relative humidity.
Switch: Built-in On/Off switch
Connector: 3-pin male XLR connector designed to mate with Can-
non XL series, Switchcraft A3 (Q.G.) series, or equivalent
Case: Die cast zinc handle, black matte finish, dent-resistant ta-
pered grille
Dimensions: 179 mm L x 50 mm W (7.1o L x 2.0o W)
Net Weight: 298 g (10.5 oz)
FURNISHED ACCESSORIES
Storage Bag. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26A13
Break-Resistant Swivel Adapter. . . . . . . . . . . . . . . . . . . . . A25D
OPTIONAL ACCESSORIES
Shock StopperTM Isolation Mount. . . . . . . . . . . . . . . . . . . A55M
Windscreen (7 colors available). . . . . . . . . . . . . A58WS Series
7.6 m (25 ft) Cable (XLR to XLR). . . . . . . . . . . . . . . . . . . . C25J
5 |
ACEC
