Operation Manual
Thank you for selecting the ZOOM 505(hereafter simply called the "505").
Please take the time to read this manual carefully so as to get the most out of
your 505 and to ensure optimum performance and reliability. Retain this manual
for future reference.
ZOOM CORPORATION
NOAH Bldg., 2-10-2, Miyanishi-cho, Fuchu-shi, Tokyo 183, Japan
PHONE: 0423-69-7111 FAX: 0423-69-7115
Printed in Japan 505-5000
1 Major Features
Y 24 individual built-in effects provide maximum flexibility.
Up to 9 effects can be used simultaneously in any combination.
Y Memory capacity for up to 24 user-programmable patches.
Y Integrated auto-chromatic guitar tuner for simple and precise tuning
anywhere.
Y Optional foot controller FP01 can be used for pedal wah or pedal pitch, and
volume control is also possible.
Y Optional foot switch FS01 can be used for bank switching, resulting in
enhanced playability.
Y Dual power supply principle allows the unit to be powered from an alkaline
battery or an AC adapter.
Y New DSP (digital signal processor) ZFx-2 developed by Zoom produces
high-quality effects from an amazingly compact package.
2 Safety Precautions
USAGE AND SAFETY PRECAUTIONS
Usage precautions
In this manual, symbols are used to highlight warnings and
cautions for you to read so that accidents can be prevented. TheElectrical interference
meanings of these symbols are as follows:
For safety considerations, the 505 has been designed to provide
This symbol indicates explanations about extremely
maximum protection against the emission of electromagnetic
dangerous matters. If users ignore this symbol and
radiation from inside the device, and from external
handle the device the wrong way, serious injury or
interference.However, equipment that is very susceptible to
Warninginterference or that emits powerful electromagnetic wavesdeath could result.
This symbol indicates explanations about dangerousshould not be placed near the 505, as the possibility of
matters. If users ignore this symbol and handle theinterference cannot be ruled out entirely.
device the wrong way, bodily injury and damage to the
Cautionequipment could result.Whatever the type of digital control device, the 505 included,
electromagnetic damage can cause malfunctioning, and can
Please observe the following safety tips and precautions to ensurecorrupt or destroy data. Since this is an ever-present danger,
hazard-free use of the 505. thorough care should be taken to minimize the risk of damage.
Cleaning
About power
Use a soft, dry cloth to clean the 505. If necessary, slightly
WarningYSince power consumption of this unit is fairly high, wemoisten the cloth. Do not use abrasive cleanser, wax, or
recommend the use of an AC adapter whenever possible.solvents (such as paint thinner or cleaning alcohol), since these
When powering the unit from a battery, use only an alkalinemay dull the finish or damage the surface.
type.
AC adapter operation Connecting cables and input and output jacks
Y Be sure to use only an AC adapter which supplies 9 V DC,You should always turn off the power to the 505 and all other
300 mA and is equipped with a "center minus" plug (Zoomequipment before connecting or disconnecting any cables. Also
AD-0006). The use of an adapter other than the specified typemake sure to disconnect all cables and the AC adapter before
may damage the unit and pose a safety hazard.
moving the 505.
Y Connect the AC adapter only to an AC outlet that supplies the
rated voltage required by the adapter.
Y When disconnecting the AC adapter from the AC outlet,
always grasp the adapter itself and do not pull at the cable.
Y If the unit is not to be used for a long time, disconnect the AC
adapter from the outlet.
Battery operation
Y Use only a 9 V (alkaline) battery (6LR61).
Y The 505 cannot be used for recharging.
Pay close attention to the labelling of the battery to make sure
you choose the correct type.
Y If the 505 is not to be used for an extended period of time,
remove the battery from the unit.
Y If battery leakage has occurred, wipe the battery compartment
and the battery terminals carefully to remove all remnants of
battery fluid.
Y While using the unit, the battery compartment cover should
be closed.
Environment
CautionAvoid using your 505 in environments where it will be
exposed to:
Y Extreme temperature
Y High humidity or moisture
Y Excessive dust or sand
Y Excessive vibration or shock
Handling
CautionYThe 505 is a precision instrument. Except for the foot
switches, do not push other parts with your feet or subject
them to strong force.
Y Take care that no foreign objects (coins or pins etc.) or liquids
can enter the unit.
Y Be sure to turn the power to all equipment off before making
connections.
Y Before moving the unit, turn the power off, and disconnect all
cables and the AC adapter.
Alterations
CautionNever open the case of the 505 or attempt to modify the
product in any way since this can result in damage to the unit. |