6-4. DRIVE AUTO ADJUSTMENT1. DVD-SL (single layer)
Select [1], insert DVD single layer disc[ENTER], and press key,
On the Test Mode Menu screen, press [1] key on the remote com-and the adjustment will be made through the following steps, then
mander, and the drive auto adjustment menu will be displayed.adjusted values will be written to the EEPROM.
## Drive Auto Adjustment ##DVD Single Layer Disc Adjustment Steps
1. SLED TILT Reset
Adjustment Menu2. Disc Check Memory SL
3. Wait 300 msec
0. ALL
1. DVD-SL4. Set Disc Type SL
5. LD ON
2. CD
3. DVD-DL6. Spdl Start
4. SACD7. Wait 1 sec
8. Focus Servo ON 0
9. Auto Track Offset Adjust
10. CLVA ON
Exit: RETURN11. Wait 500 msec
12. Tracking ON
Normally[0], is selected to adjust DVD (single layer), CD, DVD13. Wait 1 sec
(dual layer), and SACD in this order. But, individual items can be14. Sled ON
adjusted for the case where adjustment is suspended due to an
15. Check CLV Lock
error. In this mode, the adjustment can be made easily through the16. Auto LFO Adjust
operation following the message displayed on the screen.
The disc used for adjustment must be the one specified for adjust-17. Auto Focus Offset Adjust
18. Auto Tilt Position Adjust
ment. However, for SACD disc, use the player with initial data if19. Auto Focus Gain Adjust
the disc is not available.
20. Auto Focus Offset Adjust
21. EQ Boost Adjust
0. ALL22. Auto LFO Adjust
Select [0] and press [ENTER] key, and the servo set data in23. Auto Track Gain Adjust
EEPROM will be initialized. Then, 1. DVD-SL disc, 2. CD disc,Search Check
3. DVD-DL disc, and 4. SACD disc are adjusted in this order24. 32Tj Fwd .
Each time one disc was adjusted, it is ejected. Replace it with the25. 32Tj Rev
specified disc following the message. Though the message to con-26. 500Tj Fwd
firm whether discs other than SACD disc are adjusted is not dis-27. 500Tj Rev
played, you can finish the adjustment if pressing the [STOP] but-
ton. During adjustment of each disc, the measurement for disc28. All Servo Stop
type judgment is made. As automatic adjustment does not judge29. Eep Copy Loop Filter Offset
the disc type unlike conventional models, take care not to insert
wrong type discs. Also, do not give a shock during adjustment.
6-5 |
ACEC
