Using the AC Adaptor
The number of images and the battery life that
AC Adaptor (not Getting started
can be recorded/viewed are decreased under the supplied)2 To a wall outlet
following conditions:(wall socket)
- The surrounding temperature is low
- The flash is used
- The camera has been turned on and off many
times
- [LCD Backlight] is set to [Bright] on the 1
Setup screenDC plugJack cover
- [AF Mode] is set to [Monitor]
- The battery power is low.Power cord
12(mains lead)
, Open the jack cover, then , Connect the power cord (mains
connect the AC-LS5 AC lead) to the AC Adaptor and to
Adaptor (not supplied) to the a wall outlet (wall socket).
DC IN jack of the camera.
When you have finished using the AC Adaptor,
Connect the plug wvi mtha rkth efa cing disconnect it from the DC IN jack of the
up.camera and the wall outlet (wall socket).
The set is not disconnected from the AC power
Be sure to use the AC-LS5 AC Adaptor. source (mains) as long as it is connected to the
Other AC adaptors cannot be used with wall outlet (wall socket), even if the unit itself
has been turned off.
this camera.
Connect the AC Adaptor to an easily accessible
wall outlet (wall socket) close by. If some
trouble occurs while using the adaptor,
immediately shut off the power by
disconnecting the plug from the wall outlet
(wall socket).
15 |
ACEC
