Adjusting the clock
4Press b.
The cursor moves to the next item.
You can save the time when the images are captured
from the video equipment by adjusting the clock of the
printer. Once you adjust the clock, the clock is
maintained with the battery even if you turn off the
power.
1Turn on the power of the printer.
5Repeat steps 3 and 4 to set all items: month, date,
The POWER indicator lights up.year, hour and minute.
If you want to set the previous item, press B.
Setting Up
POWER switch
POWER indicator
6Press CLOCK SET.
2Press and hold CLOCK SET, then press b.
The clock setting display disappears.
The clock setting display appears on the television.
Displaying the clock
When the INPUT indicator is on, press CLOCK SET to
display the current time on the center of the screen. To
turn off the time display, press CLOCK SET again.
3Press V/v to set the month.
Pressing V increases the number.
Pressing v decreases the number.
10GBSetting UpSetting Up11GB
Using optional suppliesLoading the print cartridge
(print packs)
You need an optional print pack. The pack containsInsert the print cartridge into the printer.
print paper and ink ribbon cartridge for printing.
Use only the print cartridge supplied with the print
The following types of print packs are available:paper packed in the same carton.
PrintModelPrint paperPrint cartridgeCaution
Standard DPM-50STA Standard typefor 50 printsNever put your hand into1Press PUSH to open the cartridge compartment lid.
the cartridge
compartment. The
thermal head reaches
high temperatures,
especially after repeated
printing.
Setting Up
2Wind up the ink ribbon to remove the slack.
While pressing the
center of the reel, wind
the ink ribbon in the
Notesdirection of the arrow.
Y If the print cartridge is
not loaded when you
turn on the printer, theWind the ribbon
warning sound beepsuntil the black
and the ribbon errorline comes to the
indicator lights up.left edge.
Y When installing the ink
ribbon cartridge, stand
it as illustrated so that
dust will not get on the3Insert the print cartridge firmly until it clicks into
ink ribbon.place and close the cartridge compartment lid.
Note
Use the set of the print
paper and ink ribbon
cartridge suppliedY Do not touch the ink
together in the sameribbon or place the
carton. If you use them inprint cartridge in aLabeled side
different combination,dusty location.
proper printing resultsFingerprints or dust onIf the print cartridge does not click into place
may not be obtained, orthe ink ribbon mayRemove the print cartridge, and then re-insert it.
paper jam or other troubleresult in imperfect
may occur.printing.continued
12GBSetting UpSetting Up13GB
1-2 |
ACEC
