The sound loses stereo effect whenNo sound or only a very low-level
you play a VIDEO CD, or a CD.sound is heard from the rear
, Set OAUDIO� to OSTEREO� in the Controlspeakers.
Menu display (page 47)., Make sure the sound field function is on
, Make sure you connect the system(page 49).
appropriately., Select a sound field containing the word
Ocinema� or Ovirtual� (page 49).
The surround effect is difficult to
hear when you are playing a Dolby
Operation
Digital sound track.
The disc tray indicator is on when
, Make sure the sound field function is on
(page 49).there is no disc inside.
, Check the speaker connections and settings, If you pressed the 1 to turn off the system
(pages 25, 70).without closing the disc tray, the disc tray
, Depending on the DVD, the output signalindicator turns on. Wait a while for it to turn
may not be the entire 5.1 channels. It may beoff. If the indicator is still on, press A of
monaural or stereo even if the sound track isDISC 1-DISC 5 to close the disc tray.
recorded in Dolby Digital format.
Radio stations cannot be tuned in.
The surround effect is difficult to, Check that the antennas are connected
hear when you are playing a Dolbysecurely. Adjust the antennas and connect an
external antenna if necessary.
Digital or MPEG audio sound track.
, The signal strength of the stations is too weak
, Check the speaker connections and setting
(when tuning in with automatic tuning). Use
(pages 25, 70).
direct tuning.
, Depending on the DVD, the output signal
, No stations have been preset or the preset
may not be the entire 5.1 channels. It may be
stations have been cleared (when tuning by
monaural or stereo even if the sound track is
scanning preset stations). Preset the stations
recorded in Dolby Digital or MPEG audio
(page 30).Additional Information
format.
, Press DISPLAY so that the frequency appears
in the display.
The sound comes from the center
speaker only.
The remote does not function.
, Depending on the disc, the sound may come
, There are obstacles between the remote and
from the center speaker only.
the system.
, The distance between the remote and the
No sound is heard from the centersystem is too far.
speaker., The remote is not pointed at the remote
, Make sure the sound field function is onsensor on the system.
(page 49)., The batteries in the remote are weak.
, Select a sound field containing the word
Ocinema� or Ovirtual� (page 49).The disc does not play.
, There is no disc inside.
, The disc is turned over.
Insert the disc with the playback side facing
down on the disc tray.
continued
GB
75 |
ACEC
