Adjustments
2Press the ? >/. buttons.
Adjusting the Picture Size> . . .to rotate clockwiseSetting the Color TemperatureResetting the Adjustment
. . . . to rotate counterclockwiseData to Factory-preset Levels
The adjustment data becomes the individual setting for eachThe selected color temperature becomes the common setting
input signal received.for all input signals.To reset an adjustment item
1Press the SIZE button.1Press the COLOR button.Press the button of the adjustment item you want to reset,
The OSIZE� OSD appears.The OCOLOR TEMPERATURE� OSD appears.and then press the RESET button before the OSD (On
SIZEScreen Display) disappears.COLOR
SIZETo erase the OGEOMETRY� OSD, press the GEOM buttonCOLOR TEMPERATURE
again.VAR IABLE
The OGEOMETRY� OSD automatically disappears 105000K 9300K
3268To reset all adjustment data at once (for50
seconds after you release the buttons.
the received signal)
2For vertical adjustmentTo reset, press the RESET button while the OSD is on.2Adjust with the > ?// and ? >/. buttons.Press the RESET button when no OSD is shown.
Press the ? >/. buttons.
RESET
To select 5000K or 9300K
Adjusting the PincushionPress the > ?// buttons.
The selected color temperature is indicated in yellow.
The adjustment data becomes the individual setting for each
input signal received.
To reset all adjustment data to factory-
> . . . to enlarge1Press the GEOM button.preset levels
. . . . to diminishThe OGEOMETRY� OSD appears.Press and hold the RESET button for more than 2 seconds.
GEOMAll adjustment data are reset to factory-preset levels.
For horizontal adjustment? . . . to select 5000K
GEOMETRY
Press the > ?// buttons./ . . . to select 9300KRESET
N3268
To obtain the desired color temperature between
5 5000K and 9300K
2Press the > ?// buttons.
Press the ? >/. buttons.
N
? . . . to diminish
/ . . . to enlarge
To erase the OSIZE� OSD, press the SIZE button again.
The OSIZE� OSD automatically disappears 10 seconds after? . . . to diminish the picture sides
> . . . for higher temperature
you release the buttons.
. . . . for lower temperature
To reset, press the RESET button while the OSD is on.
Your most recent adjusted color temperature will be
recalled by pressing the ? >/. button.
/ . . . to expand the picture sides
Adjusting the Picture Rotation
To erase the OCOLOR TEMPERATURE� OSD, press the
COLOR button again.
The adjustment data becomes the common setting for all
The OCOLOR TEMPERATURE� OSD automatically
input signals.disappears 10 seconds after you release the buttons.
To erase the OGEOMETRY� OSD, press the GEOM button
1Press the GEOM button.
again.To reset, press the RESET button while the OSD is on.
The OGEOMETRY� OSD appears.
The OGEOMETRY� OSD automatically disappears 10
GEOMseconds after you release the buttons.
GEOMETRY
To reset, press the RESET button while the OSD is on.
3268
CPD-100ES
67 |
ACEC
