If you made a mistake
Step 2: Setting the timePress m/M repeatedly until the incorrect item
flashes, then set it again.
You must set the time beforehand to use the timer
To change the preset time
functions.
You can change the preset time while the system
The clock is on a 24-hour system for the European
model, and a 12-hour system for other models.is off.
The 24-hour system is used for illustration1 Press DISPLAY to display the clock.
purposes.2 Press CLOCK/TIMER SET.
3 Repeat steps 3 to 6 of OSetting the time.�
?/1Tips
2
1Y The upper dot of the colon flashes for the first 30
DISPLAYseconds, and the lower dot flashes for the last 30
4,6seconds of each minute.
Y Each time you press DISPLAY while the system is
off, the display switches between no display and the
clock display.
NXx
mmM4
.>
3,5
1Turn on the system.
2Press CLOCK/TIMER SET.
The clock appears and the hour indication
flashes.
0:00
3Press ./> to set the hour.
4Press ENTER or M.
The minute indication flashes.
11:00
5Press ./> to set the minute.
6Press ENTER.
The clock starts.
6 |
ACEC
