6Press M.Erasing a disc title
The character you selected in step 5 stops
flashing and the cursor shifts to the right.1Press MENU/NO on the remote in stop
mode.
7Repeat steps 4 to 6 to complete the
2Turn ./> (or press . or > on
entire title.
the remote) until Name Erase ? appears,
If you made a mistakethen press ENTER/YES on the remote.
Press m or M until the character youCD
3Turn ./> (or press . or > on
want to change flashes, then repeat steps 4
the remote) to select the disc title you want
to 6.to erase.
To erase a characterThe disc title appears scrolling in the display.
Press m or M until the cursor shifts toNo Name appears if no disc title is labeled.
the character you want to erase, then press
4Press ENTER/YES on the remote again.
CLEAR on the remote while the character is
Complete! appears.
flashing. You cannot insert characters.
To erase all disc titles, turn ./> (or
8Press ENTER/YES on the remote topress . or > on the remote) until All
complete the labeling procedure.Erase? appears in step 2, then press ENTER/
YES on the remote twice.
To cancel labeling
Press MENU/NO on the remote during step 1To cancel erasing
to 7.Press MENU/NO on the remote during steps 1
to 3.
Checking the disc titles
Note
To ensure that disc titles are not erased from memory,
1Press MENU/NO on the remote in stop
have the system connected to wall outlet at least once
mode.a month.
2Turn ./> (or press . or > on
the remote) until Name Check ? appears,
then press ENTER/YES on the remote.
3Turn ./> (or press . or > on
the remote) to select the disc titles stored in
the system memory between 01 and 50.
To check the current disc title
Press SCROLL on the remote in stop mode.
13 |
ACEC
