If the front panel does not open
Removing the unitbecause of a blown fuse
1Remove the front cover
With the front panel open
1Press the clip inside the front cover
1Remove the front coverwith a release key (supplied), and
pry the front cover free.
1Press (OPEN/CLOSE) or( OPEN) of
the unit, then press the clip inside
the front cover with a thin
screwdriver, and gently pry the front
cover free.
Release key (supplied)
Note
To protect the surface of the unit, put thin cloth
between release key and the unit by inserting the
2Repeat step 1 on the left side.release key.
The front cover is removed.
2Repeat step1 on the left side.
The front cover is removed.
2Remove the unit
1Use a thin screwdriver to push in
the clip on the left side of the2 unReitmo, ve the unit
then pull out the left side of the unit
until the catch clears the mounting.1Use a release key to push in the clip
on the left side of the unit, then pull
out the left side of the unit until the
catch clears the mounting.
2Repeat step 1 on the right side.
3Slide the unit out of the mounting.2Repeat step1 on the right side.
3Slide the unit out of the mounting.
32 |
ACEC
