Do not expose the discs to direct sunlight or
heat sources such as hot air-ducts, or leave
them in a car parked in direct sunlight whereMaintenance
there can be a considerable rise in the
temperature inside the car.Fuse replacement
When replacing the fuse, be sure to use one
that matches the amperage described on the
fuse. If the fuse blows, check the power
connection and replace the fuse. If the fuse
blows again after replacement, there may be an
internal malfunction. In such a case, consult
your nearest Sony dealer.
Before playing, clean the discs with an optional
cleaning cloth. Wipe each disc from the center
out.
Do not use solvents such as benzine, thinner,Fuse (10 A)
commercially available cleaners or antistatic
spray intended for analog discs.
Warning
Never use a fuse with an amperage rating
exceeding the one supplied with the unit asEN
this could damage the unit.TV/VideoAdditional Information
Cleaning the connectors
Notes on moisture condensationThe unit may not function properly if the
On a rainy day or in a very damp area,connectors between the unit and the front
moisture may condense on the lenses insidepanel are not clean. To prevent this, open the
the CD player. Should this occur, the unit willfront panel by pressing (RELEASE), then
not operate properly. In this case, remove thedetach it and clean the connectors with a
disc and wait for about an hour until thecotton swab dipped in alcohol. Do not apply
moisture evaporates.too much force. Otherwise, the connectors may
be damaged.
When you play 8 cm CDs
Use the optional Sony compact disc single
adapter (CSA-8) to protect the CD player from
being damaged.
Main unit
Back of the front panel
29 |
ACEC
