KEY TO SYMBOLS
Symbols
Only use non-metallic, �exible cutting
WARNING! Clearing saws, brushcutters
attachments, i.e. trimmer heads with
and trimmers can be dangerous! Careless
trimmer cord.
or incorrect use can result in serious or
fatal injury to the operator or others. It is
extremely important that you read and
understand the contents of the operatorOs Noise emission to the environment
manual.according to the European CommunityOs
Directive. The machineOs emission is
speciŢed in chapter Technical data and on
Please read the operatorOs manual label.
carefully and make sure you understand
the instructions before using the machine.
Always wear:Other symbols/decals on the machine refer to special
certiŢcation requirements for certain markets.
Y A protective helmet where there is a risk
of falling objects
Y Approved hearing protectionSwitch off the engine by moving the stop
switch to the STOP position before carrying
Y Approved eye protection
out any checks or maintenance.
Max. speed of output shaft, rpm
Always wear approved protective gloves.
This product is in accordance with
applicable EC directives.
Regular cleaning is required.
Watch out for thrown objects and
ricochets.
Visual check.
The operator of the machine must ensure,
while working, that no persons or animals 15 m15 m
50FTApproved eye protection must always be 50FT
come closer than 15 metres.
used.
Machines Ţtted with saw blades or grass
blades can be thrown violently to the side
when the blade comes into contact with a
Å¢xed object. This is called blade thrust. The
blade is capable of amputating an arm or
leg. Always keep people and animals at
least 15 metres from the machine.
Arrows which show limits for handle
positioning.
Always wear approved protective gloves.
Wear sturdy, non-slip boots.
2 � English |
ACEC
