STARTING AND STOPPING
NOTE:Ifenginedies,returnblueengineFor throttle handles with a start
choke lever to the closed position andthrottle lock:
repeat starting steps.Set the throttle to the start position by first
CAUTION! Do not pull the starter cord allpressing the throttle lock and the throttle
the way out and do not let go of the startertrigger, then pressing the start throttle
handle when the cord is fully extended.button (A). Then release the throttle lock
This can damage the machine.and the throttle trigger, followed by the start
throttle button. The throttle function is now
activated. To return the engine to idle,
press the throttle lock and throttle trigger
again.
Warm engine
With a warm engine, squeeze and hold the
throttle trigger. Pull starter rope sharplyStopping
while squeezing throttle trigger until engineStop the engine by pushing and holding
runs.the stop switch in the STOP position until
the engine stops.
CAUTION!
Do not put any part of your body in marked
area. Contact can result in burns to the
skin, or electrical shock if the spark plugCAUTION! The stop switch automatically
cap has been damaged. Always usereturns to the start position. In order to pre-
gloves. Do not use a machine with dam-vent unintentional starting, the spark plug
aged spark plug cap.cap must be removed from the spark plug
when assembling, checking and/or per-
forming maintenance.
WARNING:Whentheengineis
started with the choke in the closed
position the cutting attachment will
start to rotate immediately.
16 |
ACEC
