Safety Precautions
3. Before using the machine and after any 8. impact,Whilst using the Hedgetrimmer always be sure
check for signs of wear or damage and repairof a safe and secure operating position.
as necessary.9. Keep hands and feet away from the cutting
4. Always ensure the hand guard supplied is means fittedat all times and especially when
before using the Hedgetrimmer. Never attemptswitching on the motor.
to use an incomplete Hedgetrimmer or one10. Do not use stepladders whilst operating the
with an unauthorised modification.Hedgetrimmer.
Use11. Remove the plug from the mains :-
1. Use the Hedgetrimmer only in daylight - or before goodleaving the Hedgetrimmer unattended
artificial light.for any period;
2. Avoid operating your Hedgetrimmer on -a before wetclearing a blockage;
hedge, where feasible. -before checking, cleaning or working on the
3. Know how to stop the Hedgetrimmer quickly appliance;in
an emergency.-if you hit an object. Do not use your
4. Never hold the Hedgetrimmer by the guard.Hedgetrimmer until you are sure that the
5. Never operate the Hedgetrimmer withentire Hedgetrimmer is in a safe operating
damaged guards or without guards in place.condition;
6. Remove plug from mains beforepassing-if the Hedgetrimmer starts to vibrate
Hedgetrimmer to another person.abnormally. Check immediately. Excessive
vibration can cause injury.
-before passing to another person.
Maintenance and storage
1. Keep all nuts, bolts and screws secure to be
sure the Hedgetrimmer is in safe working
Xcondition.
2. Replace worn or damaged parts for safety.
3. Be careful during adjustment of the
Hedgetrimmer to prevent entrapment of the
fingers between moving blades and fixed parts
of the machine.
4. After use the Hedgetrimmer should be stored
using the blade cover/storage holder provided.
7. Avoid operating while people especially
children are nearby.
Preparation Instructions
Fitting the Cable Holder to Your Hedgetrimmer
(A) and (B)2. Secure by pulling the cable holder, in the
direction shown, away from the Hedgetrimmer,
1. Insert T-shaped hooks of cable holder into blades T-until it locks into (B) position.
shaped holes on the underside of your
Hedgetrimmer(A).
Starting and Stopping
Before starting your Hedgetrimmer.To start your Hedgetrimmer
1. Form a loop in mains cable and push the 1. There loopare two switch levers fitted to your
through the hole in the cable holder asHedgetrimmer.
illustrated Fig. Cin .2. Both switch levers need to be held in the
2. To secure, position the loop around the operating hookposition (G) for the product to start.
as illustrated Fig. Din .
3. Connect female extension cable connector to
the male plug lead on your (E)product. To stop your Hedgetrimmer
4. Connect to mains and switch on
5. Remove blade cover/storage holder as-if the Hedgetrimmer starts to vibrate
illustrated Fig. Fin .before stopping.
1. To stop, release switch onelever (H).
ENGLISH - 2 |