Something not working
If the appliance is not working correctly, please carry out the following checks, before contacting your local Service
Force Centre.
IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation,
a charge will be made even if the appliance is under guarantee.
SYMPTOM SOLUTION
?????The cooker does not operate.?????Check that the unit is plugged in and the electrical
supply is switched on.
?????Check the mains fuse has not blown.
?????Check the correct control knob has been turned.
?????The ceramic hob is not giving satisfactory results.?????Check the cooking pan is the correct size for the
cooking zone.
?????Check the cooking pan has a flat base.
?????Check the setting is correct for the type of cooking.
????? The oven does not come on.?????Check that a cooking function has been selected.
?????Check that the oven door is completely closed.
?????Check that the time of day has ben set (see
chapter "Setting the time of day").
?????Check that the socket switch or the switch from the
mains supply to the cooker are ON.
?????The oven light does not come on.?????Select a function with the oven function control
knob.
?????Check the light bulb, and replace it if necessary
(see "Oven Lamp replacement").
?????It takes too long to finish the dishes, or they are?????The temperature may need adjusting.
cooked too fast.
?????Steam and condensation settle on the food and the?????Refer to the contents of this booklet, especially to
oven cavity.the chapter ?Using the Oven?.
?????Leave dishes inside the oven no longer than 15-20
minutes after the cooking is completed.
?????The oven fan is noisy.?????Check that shelves and bakeware are not vibrating
in contact with the oven back panel.
?????The display shows "12.00".?????Set the time of day (see chapter "Setting the time of
day").
If after all these checks, the cooker still does not work, contact your local Service Force Centre.
18 |
ACEC
