Remedios en caso de una averÃa
Si se presenta una averÃa, posiblemente se trateSi en la placa vitrocerámica hay una rotura de
sólo de un fallo de poca importancia que ustedcristal, indique a su centro de servicio postventa
puede reparar por sà mismo con ayuda de losel nmero de tres dÃgitos que se encuentra en la
consejos que se indican a continuación.placa de vidrio.
Si el fallo no puede eliminarse con ayuda de
estas informaciones, dirÃjase a su comerciante
especializado o al servicio postventa.
Si usted solicita ayuda al servicio
postventa a causa un de error de
manejo, la visita del técnico del
servicio postventa no podrá ser
gratuita, ni siquiera durante el perÃodo
de garantÃa.
AveraCausaRemedio
Los indicadores digitales noEl aparato ha sido manejadoManejar el aparato
funcionan.de manera incorrecta.correctamente.
La corriente está cortada.1. Esperar el fin del corte de
corriente.
2. Conectar el aparato.
Un fusible de la instalaciónColocar el fusible.
doméstica está fundido.El fusible vuelve a fundirse:
1. Desconexión del aparato
2. Llamar a un electricista
autorizado.
La protección contraEsperar a que las zonas de
sobrecalentamiento hacocción se hayan enfriado.
provocado la desconexión de
todas las zonas de cocción y
ha bloqueado las funciones de
las mismas.
La superficie de vitrocerámicaEn la superficie de1. Desconectar el aparato.
tiene fracturas, fisuras ovitrocerámica han caÃdo2. Separar el aparato de la red
grietas.objetos duros o puntiagudos.eléctrica (sacar el fusible).
3. Llamar al servicio
postventa.
31 |