Maintenance and care
The hood must always be disconnected from the electricity supply before beginning any
maintenance work.
CleaningWarning
Warning: always disconnect the hood from the Failure to observe the instructions on cleaning
mains power supply before cleaning it.the unit and changing the filters will cause a
Never insert pointed objects in the motorfire hazard. Y?sou are therefore strongly
protective grid.recommended to follow these instructions.
Wash the outside surfaces using a delicate The manufacturer declines all responsibility for
detergent solution. Never use caustic deterany damage to the motor or any fire damagegents
or abrasive brushes or powders.linked to inappropriate maintenance or failure
Only ever clean the switch panel and filterto observe the above safety recommendations.
grille using a damp cloth and delicate
detergents.
It is extremely important to clean the unit and
change the filters at the recommended intervals.
Failure to do so will cause grease deposits to
build up that could constitute a fire hazard.
Metal grease filter
The purpose of the grease filters is to aspirate
grease particles which form during cooking and
it must always be used, either in the external
evacuation or internal recycling function.
Attention: the metal grease filters must be
removed and washed, either by hand or in the
dishwasher, every four weeks.
Open the metal grease filter
Pull the lateral handles towards the bottom, by
placing them in the front and removing the
filter Fig. 3. .
Hand washing
Soak grease filters for about one hour in hot
water with a grease-loosening cleaner, then
rinse off thoroughly with hot water. Repeat the
process if necessary. Refit the grease filtersFig. 3
when they are dry.
Dishwasher machine
Place grease filters in dish washer. Select most
powerful washing programme and highest
temperature, at least 65°C. Repeat the process.
Refit the grease filters when they are dry.
When washing the metal grease filter in the
dishwasher a slight discoloration of the filter
can occur, this does not have any impact on its
performance.
Clean the inner housing using a hot detergent
solution only (never use caustic detergents,
abrasive powders or brushes).corrosifs ou de
brosses a récurer!).
6 |