Description of the cooker hood
The cooker hood
Control panel
Work light
Duct
Motorhouse
Grease filter
AccessoriesFunctions
The following are included with the cooker hood:There are two possible systems:
? Template for mounting: Template for mounting? Extraction of air to outside using optional
on wall and under cupboard (printed on packaging).venting kit and evacuation duct.
? Mounting set: 4 pcs 4x60 mm screws, 4 pcs 5x30? Recirculation using optional carbon filter.
mm screws, 4 pcs M5x30 mm screws, 4 pcs 5,3x15
mm washers, 4 pcs 5,3x10 mm washers, 4 pcs M5The cooker hood cannot be connected to
mm nuts, 4 pcs spacers, 4 pcs 10 mm wall dowels, 4flues of other appliances that run on
pcs locknuts, 4 pcs plastic covers, 2 pcs brackets.
energy sources other than electricity.
? Cold air valve.Please, keep to the provisions of official
? Instruction book.directives regarding the question of fumes
Following is ordered from retailer:
discharge.
? Venting kit: When the cooker hood is to be
connected to an evacuation channel use the venting
Use the carbon filter. When you use the
kit containing one ventilation pipe, one roof
carbon filter, the air is purified within the
connecting metal flange and two clamps.
cooker hood and recirculated back into
PNC 391 414 201.
the room, so heated air is not lost. It can
? LONG LIFE carbon filter: The carbon filter is to
be a good idea to use the carbon filter in
be used when the hood is connected to the
winter and normal air extraction to a duct
recirculation system.
in summer.
For new installations:
PNC 391 834 201 (50 cm), 391 834 200 (60/70 cm).
Replacements (after approx. 3 years):
PNC 391 837 001 (50 cm), 391 837 000 (60/70 cm).
? Venting grid: Venting grid for recirculation.
PNC 391 433 101.
32 |