3. ADJUSTMENTS
?Turn the power off when performing adjustments.
(1) Stylus pressure and anti-skating adjustment
1Set the anti-skating knob to "0".5Hold the counterweight
with a Ţnger so that it does
2Lower the lifter lever, and move the tone arm.
not move, then turn the sty-
? Lift the tone arm from the armrest and move it over
lus pressure adjustment0
the turntable.3.50.5
ring so that the back center1.0
3.0
line on the back of the tone1.52.52.0
arm is at "0".
6Turn the counterweight in the direction of the arrow
A and set it for the proper stylus pressure for the
cartridge you are using.
? When the counterweight is turned, the stylus pres-
sure adjustment ring also turns. Read the value on
the adjustment ring to set the proper stylus pressure.
? Please refer to the instruction manual of the cartridge
? When moving the tone arm, lower the cartridge's sty-
for set stylus pressure.
lus cover and be careful that the stylus does not
directly touch the turntable or other parts.
?For cartridges with detachable stylus covers, adjust
7Turn the anti-skating knob and set it so that the
with the stylus cover removed.
value of the cartridge's stylus pressure is lined up
with the reference line.
? This provides the proper
3Adjust the horizontal balance.
anti-skating force.
?Move the counterweight
Set parallelATI
N
forward or backward soI-SKG3
T
N
that the tone arm is par-A
0
allel to the turntable's2
1
surface when the tone
arm is released.
? When adjusting the horizontal balance, be careful
that the stylus does not touch the turntable sheet or
the main unit.
4Set the tone arm back on the armrest.
Set the tone arm back on the armrest.
5 |
ACEC
