OPTION SETTINGS
Select concerned OPTION from service menu. To change a bit on selected option press the same number from remote
controller. So this bit will be changed from 1 to 0 or from 0 to 1. If any option is selected on service menu you will see an
indicator row shows you the bit numbers.
OP3 Video Options
NOTE
BIT-7 Xtal Configuration
BIT-6 00, 1 Xtal PAL 4.43
01, 2 Xtal PAL/NTSC 4.43/3.58
10, 1 Xtal PAL/SEC/NTSC 4.43
11, 2 Xtal PAL/SEC/NTSC 4.43/3.58
BIT-5 1, Enable Blue back when no signal in AV mode 1, default value
0, blank back when no signal in AV mode
BIT-4 1, White Insertion is ON 1, default value
0, White Insertion is OFF
BIT-3 1, Blue Background when no signal in TV mode
0, Disable Blue Background in TV mode
BIT-2 1, Semi-transparent background for OSD 1, default value
0, Solid Menu background for OSD
BIT-1 1, Black Stretch is ON 0, default value
0, Black Stretch is OFF
BIT-0 1, APR is ON 1, default value
0, APR is OFF
22 |
ACEC
