2. CD3. DVD-DL (dual layer)
Select [2], insert CD disc, and press [ENTER] key, and the adjust-Select [3], insert DVD dual layer disc[ENTER], and pr keyess ,
ment will be made through the following steps, then adjusted val-and the adjustment will be made through the following steps, then
ues will be written to the EEPROM.adjusted values will be written to the EEPROM.
CD Adjustment StepsDVD Dual Layer Disc Adjustment Steps
1. Sled Tilt Rest1. Sled Tilt Reset
2. Disc Check Memory CD2. Disc Check Memory DL
3. Wait 500 msec3. Wait 500 msec
4. Set Disc Type CD4. Set Disc Type DL
5. LD ON5. LD ON
6. Spdl Start6. Spdl Start
7. Wait 500 msec7. Wait 1 sec
8. Focus Servo ON 0Layer 1 Adjust
9. Auto Track Offset Adjust8. Focus Servo ON 1
9. Auto Track Offset Adjust
10. CLVA ON
11. Wait 500 msec10. Clva ON
12. Tracking ON11. Wait 500 msec
13. (TC Display Start)12. Tracking ON
14. Wait 1 sec13. Wait 500 msec
15. Jitter Display Start14. Sled ON
16. Sled ON15. Check CLV Lock
17. Check CLV ON16. Auto Loop Filter Offset Auto Focus Adjust
18. Auto LFO Adjust17.
19. Auto Focus Offset Adjust18. Auto Focus Gain Adjust
20.19. Auto Focus Offset Adjust
21. Auto Focus Gain Adjust20. Eq Boost Adjust
22. Auto Focus Offset Adjust21. Auto Loop Filter Offset
23. Eq Boost Adjust22. Auto Track Gain Adjust
24. Auto LFO AdjustSearch Check
25. Auto Track Gain Adjust23. 32Tj Fwd
Search Check24. 32Tj Rev
26. 32Tj Fwd25. 500Tj Fwd
27. 32Tj Rev26. 500Tj Rev
28. 500Tj FwdLayer 0 Adjust
29. 500Tj Rev27. Fj (L1 ? L0)
28. Auto Track Offset Adjust L0
30. All Servo Stop
29. Clva ON
30. Wait 500 msec
31. Tracking ON
32. Wait 500 msec
33. Sled ON
34. Check CLV Lock
35. Auto Focus Filter Offset
36. Auto Focus Adjust
37.
38. Auto Focus Gain Adjust
39. Auto Focus Offset Adjust
40. Eq Boost Adjust
41. Auto Loop Filter Offset
42. Auto Track Gain Adjust
Search Check
43. 32Tj Fwd
44. 32Tj Rev
45. 500Tj fwd
46. 500Tj Rev
Layer Jump Check
47. Lj (L0 ? L1)
48. Lj (L1 ? L0)
49. All Servo Stop
6-6 |
ACEC
