2-12. ATTACHING THE DSBK-301 (IPM-662-13. CLEANING WHEN HEAD CLOGS
BOARD)
When the video head clogs, clean it as follows:
Refer to section 1-2. DSBK-301 (IPM-66 BOARD) for
more detail.2-13-1. Using a Cleaning Cassette
1. Load the DVL-12CL cleaning cassette into the unit,
play for 5 seconds, and then eject promptly.
Note: ..... Be sure to use the DVL-12CL cleaning
cassette tape.
Use of other types will cause abnormal wear
of the video head or damage to the video
head.
..... Do not use the rewound cleaning cassette
tape.
2. Check that the head clog has been solved. If the head
remains clogged even after using the cleaning cassette,
clean the video head as follows:
2-13-2. Using the Cleaning Cloth
1. Using a cleaning cloth moistened with cleaning liquid,
gently touch the cloth on the video head.
2. Rotate the drum slowly in the rotating direction of the
head (towards the left from the top) with your fingers,
and clean the video head.
Note: ..... Do not move the cleaning cloth over the
video head in the vertical direction as this
may damage the video head.
..... Turn OFF the power when cleaning.
DSR-300/P(E)/V1
2-28 |
ACEC
