4. Mecha Select
When the main power is turned on, the MECHA SELECT display
appears on the LCD screen. Select the desired mechanism name
using the RVS and FF buttons. Selection is complete when the SELMECHA SELECT
button is pressed. (Fig. A shows the B mechanism.)
B
Pressing the RVS or FF button
changes the mechanism name.
Fig. a
5. Test Type Select
Using the RVS and FF buttons, select a desired test type from the
three types of OMANUAL�, OSTEP� and OAUTO�. Selection is
complete when the SEL button is pressed.TEST TYPE SELECT
MANUAL
Pressing the RVS or FF button cycles
among MANUAL, STEP, AUTO in this order.
Fig. b
6. Manual Test
In this test, the motor of the mechanism deck is turned on only
Mechanism name
during the period while the RVS or FF button is pressed manually.
Present mode
Motor ON/OFF
B MANUAL OFF
STATUS
Present status of sensor appears. (example: EJ)
Fig. c
7. Step Test
In this test, the direction of motor movement is determined by the
RVS and FF buttons. The motor of the mechanism deck is kMechanism nameept
turned on until the mechanical status is changed from the presentPresent mode
mechanical status that is obtained from the sensor information.Motor ON/OFF
B STEP OFF
STATUS
Present status of sensor appears. (example: EJ)
Fig. d
8. Auto Test
In this test, the mechanism deck is tested as to whether it performs
Mechanism name
a series of movements correctly in accordance with the operation
Present mode
sequence that is memorized earlier for each type of deck, by checkingMotor ON/OFF
the output signals from sensors with the stored memory. Turning
B AUTO OFF
on the RVS or FF button performs the same operation.
STATUS
Present status of sensor appears. (example: EJ)
Fig. e
N 7 N |
ACEC
