SELF-DIAGNOSIS FUNCTION
1.Self-diagnosis Function2.Self-diagnosis Display
When problems occur while the unit is operating, the self-diagnosisWhen problems occur while the unit is operating, the counter of the
function starts working, and displays on the viewfvieinder or Displaywfinder or Display window shows a 4-digit display consisting
window what to do. This function consists of twof an alphao display; self-bet and numbers, which blinks at 3.2 Hz. This 5-character
diagnosis display and service mode display.display indicates the Orepaired by:�, Oblock� in which the problem
Details of the self-diagnosis functions are provided in the Instroccurred, and Odetailed code� of the problem.uction
manual.
ViewfinderDisplay window
C : 3 1 : 1 1C : 3 1 : 11
Blinks at 3.2Hz
C3 1 1 1
Display window
Repaired by:BlockDetailed Code
C : Corrected by customerIndicates the appropriateRefer to page 10 and 11.
H : Corrected by dealerstep to be taken.Self-diagnosis Code Table.
E : Corrected by serviceE.g.
engineer31 ....Road the tape.el
32 ....Turn opower again.n
3.Service Mode Display
The service mode display shows up to six self-diagnosis codes shown in the past.
3-1. Display Method
While pressing the OSTOP� key, set the switch from OFF to OVTR or PLAYER�, and continue pressing the OSTOP� key for 5 seconds
continuously. The service mode will be displayed, and the counter will show the backup No. and the 5-codes.haracter self-diagnosis c
ViewfinderDisplay window
[3] C : 3 1 : 1 1
3 C : 3 1 : 11
Lights up
[3] C : 3 1 : 1 1
Backup No.Self-diagnosis Codes
Control dial
Order of previous errors
3-2. Switching of Backup No.
By rotating the control dial, past self-diagnosis codes will be shown in order. The bac which thekup No. in the [] indicates the order in
problem occurred. (If the number of problems which occurred is less than 6, only the number of problems wshown.)hich occurred will be
[1] : Occurred first time[4] : Occurred fourth time
[2] : Occurred second time [5] : Occurred fifth time
[3] : Occurred third time[6] : Occurred the last time
3-3. End of Display
Turning OFF the power supply will end the service mode display.
Note:The Oself-diagnosis display� data will be backed up by the coin-type lithium battery (CF-079/080 board BT101). When
the CF-079/080 board is disconnected, the Oself-diagnosis display� data will be lost by initialization.
N 9 N |
ACEC
