Getting StartedCustomizing Your MonitorGetting StartedCustomizing Your Monitor
2Press the ?./> and >?// buttons to select OBefore adjusting
Selecting the Input SignalOPTION,� and press the MENU button again.Y Connect the monitor and the computer, and turn them on.Introducing the On-screen
The OPTION OSD appears.Y Select OLANG� in the MENU OSD, then select
Display System
This monitor has two signal input connectors (HD15 andOENGLISH� (see page 17).
5BNC) and can be connected to two computers. When theOPTION
Most adjustments are made using the MENU OSD.
power of both computers is on, select the input signal youON
want to view as follows.Adjusting the Picture BrightnessMENU OSD
ZZ...1 MIN
1Turn on the monitor and both computers.UNLOCKand ContrastPress the MENU button to display the MENU OSD.
MANUAL DEGAUSSThis MENU OSD contains links to the other OSDs described
2Press the INPUT button to select the HD15 or 5BNCOnce the setting is adjusted, it will be stored in memory forbelow.
input signal.all input signals received.
Each time you press the INPUT button, the input signal3Press the ?./> buttons to select O (INPUT).�
1Press the ? (brightness) ./> or > (contrast) ?//
and corresponding indicator alternate.
OPTIONbuttons.MENUOKMENU
The BRIGHTNESS/CONTRAST OSD appears.
HD15 BNCINPUTMENU
AUTOMANUALCOLORCENTERSCREEN
BRIGHTNESS/CONTRAST
ZZ...1 MINGEOMEXITZOOM
UNLOCK
2626
INPUT80.0kHz/ 75HzLANGSIZEOPTION
Selecting the INPUT signal mode
HorizontalFrequency* VerticalFrequency*
1-3This monitor has two modes of input signal selection,4Press the >?// buttons to select OAUTO� orOMANUAL.�
EN
OAUTO� and OMANUAL.�
2For brightness adjustment
When OAUTO� is selectedPress the ?./> buttons.1 COLORF
Displays the COLOR OSD for adjusting the color
If no signal is input from the selected connector, the monitor
temperature.ES
automatically selects the other connectorOs signal. When you
restart the computer you want to view, or that computer is2 CENTER> . . . for more brightness
in power saving mode, the monitor may automatically. . . . for less brightnessCDisplays the CENTER OSD for adjusting the centering
select the other connectorOs signal. This is because theThe OPTION OSD automatically disappears after about 30of the picture.
monitor switches from the interrupted signal to the constantseconds.
signal. If this happens, manually select the desired signalTo close the OSD, press the MENU button again.For contrast adjustment3 SCREEN
using the INPUT button.Press the >?// buttons.Displays the SCREEN OSD for adjusting the vertical
For more information on using the OSD, see OIntroducingand horizontal convergence, etc.
When OMANUAL� is selectedthe On-screen Display System� on page 9.
Even if no signal is input from the selected connector, the/ . . . for more contrast4 ZOOM
monitor does not select the other connectorOs signal.? . . . for less contrastDisplays the ZOOM OSD for enlarging and reducing
the picture.
1Press the MENU button.5 OPTION
The MENU OSD appears.Displays the OPTION OSD for adjusting the OSD
The OSD automatically disappears after about 3 seconds.
position and degaussing the screen, etc.
MENUOKMENU
To reset, press the RESET button while the OSD is on. The6 SIZE
MENUCOLORCENTERSCREENbrightness and contrast are both reset to the factory settings.Displays the SIZE OSD for adjusting the picture size.
GEOMEXITZOOM* The horizontal and vertical frequencies for the received input
7 LANG
signal appear in the BRIGHTNESS/CONTRAST OSD.
LANGSIZEOPTIONDisplays the LANGUAGE OSD for selecting the
language.
8 GEOM
Displays the GEOMETRY OSD for adjusting the picture
rotation and pincushion, etc.
9 EXIT
Closes the MENU OSD.
89 |
ACEC
