CDX-5V661/5V661A/5V661D/5V661S
3. Mechanism Check Mode (See ODisplay List� on page 18 and 19)
This mode can adjust the linear position and check manually the operation of the elevaortor motor., loading motor, and divider mot
Also, the disc can be ejected forcibly by moving each motor manually.
However, manual operation could destroy the mechanism depending on the mechanical position, thus requiring extreme care.
Push key (execution key) assignment
KeyDescriptionKeyDescription
1DISP �9
2DISP +0
3ELEVATOR MOTOR -qaDIVIDER MOTOR �
4ELEVATOR MOTOR +qsDIVIDER MOTOR +
5qd
6qf
7LOADING MOTOR -qg
8LOADING MOTOR +qhLINEAR POSITION ADJUST
* The check results of each key cannot be confirmed with the MODE LED.
How to enter the Check mode
1. Rotating the rotary switch, adjust the display (7 SeO2� (third place).g LED) to
: Software version display
After 2 or 3 seconds, the display will change to the execution mode.
: DTMS display
2. The display mode number can be changed b1y and pressing the 2 keys.
(See OExample� in step 2 in the Normal mode on page 22 and 23)
3. Press 3 and 4 keys to check manually the elevator motor operation.
4. Press 7 and 8 keys to check manually the loading motor operation.
5. Press qa and qs keys to check manually the divider motor operation.
6. The linear position can be adjusted by pressing qh key.
For the adjusted values and adjustment results,ODisplay List� (pa see ge 18 and 19).
MODE LED display
L1L2L3L4L5L6L7L8
��������
��������
��������
Default display mode
Display mode No.Description
5Mechanism
26 |
ACEC
