6. White Balance Adjustment (VF-141 board)
Correct the white balance.
If deviated, the reproduction of the EVF screen may degenerate.
ModeCamera
SubjectArbitrary
Measurement PointCheck on EVF screen
Measuring Instrument
Adjustment Page7
Adjustment AddressDA, DB
Specified ValueThe EVF screen should not be colored.
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 7, address: DA and DB, set the data to the initial
value.
Note:To write in the non-volatile memory (EEPROM), press the
PAUSE button of the adjustment remote commander each time
to set the data.
AddressDADB
Data8D83
3) Check that the EVF screen is not colored. If colored, change
the data of page: 7, address: DA and DB so that the EVF screen
is not colored.
Note:To write in the non-volatile memory (EEPROM), press the
PAUSE button of the adjustment remote commander each time
to set the data.
4) Select page: 0, address: 01, and set data: 00.
5-30 |
ACEC
