1-4. Cleaning
1-4. Cleaning1-4-2. Cares After Using at Special
Environment
1-4-1. Cleaning of Viewfinder
It is recommended to check the following items after
By extracting VF tube sub assy, lens and MC protector cangathering the news at seaside, dust area or spa.
be easily cleaned. And also dust on the CRT surface or
mirror can be easily cleaned off.1. Clean off sand and other dust in the unit carefully.
2. Do not allow salt in seawater or sulfur in spa to contact
1. Turn the hold ring to the left and extract the VF tubea not-painted surface of the cabinet. They may cause to
sub assy.corrode. Clean with alcohol immediately if contacted.
2. Detach the eyecup.3. Clean the connection surface of connectors.
3. Remove the MC protector with a commercially4. Carry out the common operation check and check that
available camera lens cleaner. Blow off dust with athe unit has not an abnormal sound or operation.
blower carefully so as not to flaw the mirror.
5. After the cleaning is completed, install by reversing
the preceding steps. Align red lines of the VF tube and
VF tube sub assy when inserting, and turn the hold
ring to the right until it locks.
m
Y Do not use any type of solvent, such as alcohol, benzine
or thinner to remove stains.
Y Be sure to attach the eyecup to the VF, or the MC
protector may come off.
Y To protect the viewfinder lens from drops, put the MC
protector in the filter holder and attach the eyecup
securely.
Hold ring
Align red lines
VF tube subMC protector
assembly
Filter holder
Eyecup
1-2 (E)BVF-10 (UCJ)
BVF-10CE (CE) |
ACEC
