FrameMaker Ver5.5E(PC) CF3102/CF2002 DIS/REASSEMBLY, ADJUSTMENT
02.06.010
(4)Removal of the High Voltage Unit (PC Drum CH.), High Voltage Unit (Image
Transfer, Neutralizing), High Voltage Unit (Developing Bias), and Paper Size
Detecting Board
1. Remove the Rear Upper Cover.
2. Remove the Rear Left Cover.
3. Remove the Rear Right Cover.
4. Remove five screws and the harness protective
metal bracket.
4025D015AA
5. Remove three screws and unplug three connec-
tors. Then, remove the rear left metal bracket.
4025D017AA
6. Unplug all connectors from the Main Board.
7. Unplug the two connectors from the Option Inter-
face Board.
8. Unplug the two connectors from the PIC Board.
4025D016AA
9. Remove two screws and the 2nd Drawer power
line mounting bracket.
4025D018AA
D-13 |