DISASSEMBLY INSTRUCTIONS
1. How to replace PICK UP.
1) Open the TRAY.PICKUP
Push the stopper to arrow direction and release half of
the SHAFT SLED.
2) Turn GEAR MAIN CAM to the counterclockwise
(arrow Oa�) direction, and lift up CD mechanism. (Fig-1)
3) Remove SHAFT SLED.
4) CD mechanism in down position, replace PICK UP.
5) Lift up CD mechanism (Fig-1), and Reassemble the
SHAFT SLED.
SHAFT SLED
STOPPER
!
GEAR MAIN CAM
Fig-1
2. How to remove the 5CD CHANGER BLOCK
(Fig-2)
1) Remove the two FFC of the CD circuit board, and
remove the five SCREWS.
2) Lift 5 CD CHANGER BLOCK from behind, and
remove it. (5CD CHANGER BLOCK can be removed
even if PANEL TRAY is not removed.)
5CD CHANGER BLOCK
SCREW
FFC
LIFT UP
FFC
Fig-2
6 |
ACEC
