DENON AVR2807 Instruction Manual

ENGLISH
Easy Setup ProcedureEasy Setup Procedure
Speaker connections2 Connections
YWith the AVR-2807, up to 10 speakers can be connected for surround playback.
Connect the speaker terminals with theY When making connections, also refer to the operating instructions of the other components.
2 Speaker impedance
speakers making sure that like polarities are
matched (< with <, > with >).SpeakerImpedance
Front speaker Front speaker
Front A, B6 ~ 16 &/ohms(A)(B)
SubwooferCenter speaker
NOTE:Front A+B8 ~ 16 &/ohms
When making connections, take care thatConnection
Centerterminal for
none of the individual conductors of the
subwoofer
Surround6 ~ 16 &/ohmswith built-inspeaker cable come in contact with (L) (R) (L) (R)
adjacent terminals, with other speakeramplifier.
Surround back><><><><
cable conductors, or with the rear panelIN><
and screws.
NEVER touch the speaker terminals
Note on speaker impedance
when the power is on. Doing so could
result in electric shocks.When using speakers with an impedance
below the designated value (for example 4
&/ohms), playing for long periods of time
with the volume high could cause the
temperature to rise, activating the protection
Connecting the speaker cables
circuit.
1. Loosen by turningWhen the protection circuit is activated, the
counterclockwise.output to the speakers is cut off and the
Either tightly twist or terminate thepower indicator blinks. If this happens,
core wires.unplug the power cord, wait for the set to
cool off and improve ventilation around the
2. Insert the cable.
unit. Also check the wiring of the input
cables and the speaker cables. After doing
3. Tighten by turningthis, plug the power cord back in and turn
clockwise.the unitOs power back on.
If the protection circuit is activated again
(L) (R) (L) (R)
even though there are no problems with the
wiring or the ventilation around the unit,
><><><><
switch off the power and contact a DENON
service center.
Surround speaker Surround back speaker
When using only one surround back
speaker, connect it to the left channel.
7
ENGLISH