FUEL HANDLING
Mixture
YAlways mix petrol and oil in a clean container
intended for petrol.
YAlways start by filling half the quantity of petrol
required. Then add the entire oil quantity. Mix
(shake) the fuel mixture. Fill the remaining
quantity of petrol.
YMix (shake) the fuel mixture carefully before
GasolinOil Y ?l
filling in the machine�s fuel tank.BenzinHuile Y Aceite
Essence
YDo not mix more than max. one monthOs supplyLit.
Gasolina
of fuel.Lit.2% (1:50)3% (1:33)
50,100,15
YIf the machine is not used for a long period of
100,200,30
time, the fuel tank should be emptied and0,45
150,30
cleaned.200,400,60
USUS
gallonfl. oz.
WARNING!
2% (1:50)3% (1:33)
The catalytic converter muffler
!12 1/23 3/4gets very hot during and after use.
2 1/26 1/29 3/4
This also applies during idling. Be
512 7/819 1/4
aware of the fire hazard, especially
when handling the saw near
flammable substances or vapours.
Fuelling
WARNING!
The following precautions reduce
!the risk of fire:
Do not smoke or place any
sources of heat in the vicinity of
the fuel. Never refuel when the
engine is running. Always stop the
engine and let it cool for a few
minutes before refuelling. Open
the fuel cap slowly when fuelling
so that any over pressure is
released slowly. Tighten the fuel
Min. 3 m (10 ft)
cap carefully after refuelling.
Always move the machine from the
fuelling place before starting.
YClean around the fuel cap. Contamination in the
tank can disrupt operations.
YEnsure that the fuel is well mixed by shaking the
container before filling the tank.
English � 13 |
ACEC
HUSQVARNA
